| Display | 3.5 inch | — |
| Operational modes | CPAP, APAP, IAPAP | — |
| Pressures delivered | 4–20 cmH2O (±0.5 cmH2O), 0.5 cmH2O steps | — |
| Boost sensitivity | Standard / Sensitive / Soft | — |
| Flow range | 10–60 L/min in 5 L/min increments | — |
| Ramp time | 0–60 min | — |
| Noise level | 30 dBA | < 30 dBA |
| Size | 250 × 181 × 114 mm | — |
| Weight | 1340 g | 1340 g |
| Electric supply input | 100–240 V (50–60 Hz) | — |
| Output | DC 24 V, 3.33 A | — |
| Operating temperature | +5°C to +35°C | — |
| Humidity | 15–93% RH without condensation | — |
| Storage | –20°C to +55°C | — |
| Atmospheric pressure | 700–1060 hPa | — |
| Humidifier capacity | 250 ml | — |
| IPAP range | — | 4–25 cmH2O |
| EPAP range | — | 4–23 cmH2O |
| CPAP range | — | 4–20 cmH2O |
| I-trigger | — | Auto, 1 to 6 |
| E-trigger | — | Auto, 1 to 6 |
| IPAP rise time | — | 0.5–3.2 s |
| Breath rate | — | 3–40 bpm |
| CPAP ramp | — | 0–60 minutes |
| Display data | — | Pressure, Flow, Leakage, I:E, VT, BPM, I-Time, MV |
| Screen | — | 3.5" |
| Displays | — | Pressure bar graph, flow bar graph, pressure flow, I:E time |
| Humidifier | — | 0–5 level, in-built, pre-heated |
| Leak compensation | — | Auto |
| Altitude adjustment | — | Auto |
| Alarms | — | Power supply failure, low voltage, obstruction, high leakage, humidifier failure, high pressure, low pressure, SD card full, apnea |
| Memory | — | 8 GB SD card |
| Power supply | — | 100–240 V, 50–60 Hz, output 24 V |
| SpO2 | — | Optional |
| WiFi | — | Optional |
| Dimensions L×W×H | — | 250 × 181 × 114 mm |
| Modes | — | S, T, ST, CPAP |
